800G OSFP Twin-port OSFP IHS/Finned Top800G OSFP Twin-port OSFP IHS/Finned Top to 2 x 400G QSFP112 Active Copper Breakout DAC Cable
The 800G OSFP Twin-port OSFP IHS/Finned Top to 2 x 400G QSFP112 Active Copper Breakout DAC Cable provides an 850Gbps (8x 106.25Gbps) copper connection between OSFP (IHS/Finned Top) to 2x QSFP112 ports with a cable length of 1-5m (3ft-16ft). Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for InfiniBand NDR fabrics, GPU clusters and AI training networks.
Product Highlights
- OSFP (IHS/Finned Top) to 2x QSFP112
- Data rate: 850Gbps (8x 106.25Gbps)
- Cable type: Active Breakout DAC (ACC)
- Length: 1-5m (3ft-16ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-2QACxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (IHS/Finned Top) to 2x QSFP112 |
| Max. Data Rate | 850Gbps (8x 106.25Gbps) |
| Media | Copper |
| Cable Type | Active Breakout DAC (ACC) |
| Cable Length | 1-5m (3ft-16ft) |
| Wire AWG | 26-30AWG |
| Minimum Bend Radius | 32.5-40mm |
| Max. Power Consumption | 1.5W (OSFP End) 0.6W (QSFP112 Per End) |
| Jacket Material | PET |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation Format | 8x100G-PAM4 to Dual 4x100G-PAM4 |
| Application | 800G/400G Ethernet/InfiniBand |
| Protocols | CMIS 5.0, IEEE 802.3ck, OSFP MSA Rev5.0, Q112 MSA |
Applications
The 800G OSFP Twin-port OSFP IHS/Finned Top to 2 x 400G QSFP112 Active Copper Breakout DAC Cable connects OSFP (IHS/Finned Top) to 2x QSFP112 ports at 850Gbps (8x 106.25Gbps) in InfiniBand NDR fabrics, GPU clusters and AI training networks. This unit is supplied at 1-5m (3ft-16ft). One port becomes 2x QSFP112, a common pattern for connecting newer aggregation ports to an installed base of lower speed equipment. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment. The link runs 8x100G-PAM4 to Dual 4x100G-PAM4 modulation, which keeps it aligned with current 800G switch silicon.
Standards and Compatibility
This product is designed and tested to comply with CMIS 5.0, IEEE 802.3ck, OSFP MSA Rev5.0, Q112 MSA. It plugs into any standards-based OSFP (IHS/Finned Top) to 2x QSFP112 port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
This model is supplied at 1-5m (3ft-16ft) under part number OSFP-800G-2QACxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26-30AWG. Samples for testing can be arranged before bulk orders.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.
Reliability Control
From incoming component inspection to final burn-in, quality is controlled at each step of production. Finished units are verified on real networking equipment in our compatibility lab, and test records are kept per batch so that any field question can be traced back quickly.
