800G OSFP IHS/Finned Top to 2 x 400G OSFP800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Active Electrical Copper Breakout AEC
Built for 800G Ethernet data center and cloud network environments, the 800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Active Electrical Copper Breakout AEC delivers 800Gbps between OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) interfaces over Active Breakout DAC (AEC) fiber at 850nm. The integrated design removes the need for separate optical modules and simplifies sparing. Cable length: 1~5m (3~16ft).
Product Highlights
- OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top)
- Data rate: 800Gbps
- Cable type: Active Breakout DAC (AEC)
- Length: 1~5m (3~16ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-2OFLAExxx |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) |
| Max. Data Rate | 800Gbps |
| Media | Copper |
| Cable Type | Active Breakout DAC (AEC) |
| Cable Length | 1~5m (3~16ft) |
| Jacket Material | PET |
| Minimum Bend Radius | 26.5~38mm |
| Wire AWG | 28~32AWG |
| Max. Power Consumption | 12W (800G End) 10W (400G Per End) |
| Modulation Format | 8x100G-PAM4 to Dual 4x100G-PAM4 |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Application | 800G/400G Ethernet |
| Protocols | OSFP MSA Rev5.1, IEEE 802.3ck, CMIS 5.0 |
Applications
The 800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Active Electrical Copper Breakout AEC connects OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) ports at 800Gbps in 800G Ethernet data center and cloud network environments. This unit is supplied at 1~5m (3~16ft). By fanning one port out to 2x OSFP (RHS/Flat Top), it doubles or quadruples the number of endpoints served per switch port and keeps the cabling plant simple. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.
Standards and Compatibility
Standards compliance covers OSFP MSA Rev5.1, IEEE 802.3ck, CMIS 5.0. The unit works in any equipment with a standard OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
This model is supplied at 1~5m (3~16ft) under part number OSFP-800G-2OFLAExxx. Other lengths of the same assembly can be produced on request. Wire gauge: 28~32AWG. Volume pricing is available for project quantities.
How We Ship
Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
