800G OSFP IHS/Finned Top to 2 x 400G OSFP800G OSFP IHS/Finned Top to 2 x 400G OSFP IHS/Finned Top Passive Copper Breakout DAC Cable
The 800G OSFP IHS/Finned Top to 2 x 400G OSFP IHS/Finned Top Passive Copper Breakout DAC Cable provides an 800Gbps copper connection between OSFP (IHS/Finned Top) to 4x OSFP (IHS/Finned Top) ports with a cable length of 0.5-2m (2ft-7ft). As a passive cable it draws essentially no power and adds no latency to the link. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for 800G Ethernet data center and cloud network environments.
Product Highlights
- OSFP (IHS/Finned Top) to 4x OSFP (IHS/Finned Top)
- Data rate: 800Gbps
- Cable type: Passive Breakout DAC
- Length: 0.5-2m (2ft-7ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-4OPCxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (IHS/Finned Top) to 4x OSFP (IHS/Finned Top) |
| Max. Data Rate | 800Gbps |
| Media | Copper |
| Cable Type | Passive Breakout DAC |
| Cable Length | 0.5-2m (2ft-7ft) |
| Wire AWG | 28-30AWG |
| Minimum Bend Radius | 26-31mm |
| Max. Power Consumption | 0.1W (800G End), 0.1W (200G Per End) |
| Jacket Material | PVC (OFNR) |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation Format | 8x100G-PAM4 to Quad 2x100G-PAM4 |
| Application | 800G/200G Ethernet |
| Protocols | OSFP MSA, CMIS Rev4.0, IEEE 802.3ck |
Applications
Designed for 800G Ethernet data center and cloud network environments, the 800G OSFP IHS/Finned Top to 2 x 400G OSFP IHS/Finned Top Passive Copper Breakout DAC Cable carries 800Gbps between OSFP (IHS/Finned Top) to 4x OSFP (IHS/Finned Top) interfaces. This unit is supplied at 0.5-2m (2ft-7ft). By fanning one port out to 4x OSFP (IHS/Finned Top), it doubles or quadruples the number of endpoints served per switch port and keeps the cabling plant simple. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.
Standards and Compatibility
Standards compliance covers OSFP MSA, CMIS Rev4.0, IEEE 802.3ck. The unit works in any equipment with a standard OSFP (IHS/Finned Top) to 4x OSFP (IHS/Finned Top) interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
This model is supplied at 0.5-2m (2ft-7ft) under part number OSFP-800G-4OPCxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 28-30AWG. Volume pricing is available for project quantities.
Worldwide Delivery
We ship to customers around the world every week. Express couriers handle most orders door to door in a few days; larger consignments go by air or sea to keep freight costs down. Tracking information is provided for every shipment, and we are flexible on shipping accounts and forwarders.
Quality and Testing
Every unit we ship is tested in our own test bed on mainstream switch and transport platforms before packing. Our test center has been fully upgraded, which sets us apart from other third party product providers: 10G, 40G, 100G, 200G and 400G transceivers and direct attach cables are verified on the latest top brand equipment, including selected original switches that can hardly be found elsewhere.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
