LC to LC Duplex Armored Fiber Patch Cable, OM4, Riser (OFCR)

Singapore high-density designs should assess this item together with panel access, cable routing and the complete optical loss allowance. This duplex armored patch cable terminates two LC UPC connectors on an OM4 50/125µm multimode product wrapped in a helical stainless steel tube. The aqua 3.0mm riser-rated (OFCR) jacket identifies the multimode grade at a glance; concurrently, the steel armor beneath it absorbs the crushing, pulling and rodent damage that interrupts unprotected leads. Bend-insensitive OM4 glass keeps the path stable where the pathway turns tightly through trays and rack posts.

Product Highlights

• Stock lengths 1m to 30m; custom lengths and jackets on request
• LC UPC to LC UPC duplex, OM4 50/125µm multimode
• Helical stainless steel armor against crush, impact and rodents
• Bend-insensitive OM4 fiber, 20/10D dynamic/static bend radius
• Riser (OFCR) flame rating for vertical building pathways
• Insertion loss ≤0.3dB, return loss ≥30dB

Specifications

OM4 multimode for 10G to 100G short-reach links

OM4 is the workhorse multimode grade for 850nm VCSEL optics. It carries 10GBASE-SR to 400m, 40GBASE-SR4 and 25G-class links comfortably, and supports 100GBASE-SR4 breakout pairs and bidirectional duplex optics over the distances typical of data center rows and equipment rooms. The duplex LC interface matches SFP+, SFP28 and QSFP-series ports directly; consequently, one armored cord range covers most short-reach multimode links without adapters.

Aqua identification in dense patching fields

The aqua jacket follows the industry color convention for OM3/OM4 multimode, which speeds up tracing and reduces cross-link errors in crowded frames. The steel armor sits invisibly under that jacket: the cord dresses and markings exactly like a standard patch cable, yet survives being stepped on, pinched by floor tiles or dragged across a tray edge during rework.

Why armor a multimode patch cord

Multimode links commonly run in the most exposed parts of a building: under raised floors, across warehouse ceilings, through retail or industrial spaces shared with power cabling and foot traffic. Conduit adds cost and locks the pathway in place. With the helical steel tube built into the cord itself, the pathway stays flexible, this optical cable count in the tray stays low, and a damaged channel generally means re-terminating nothing more than a single replaceable jumper.

Routing and installation notes

The armored cord bends and dresses like a standard 3.0mm jumper, with two differences worth respecting: keep the pathway inside the 20/10D bend-radius limits of the OM3/OM4 glass, and avoid crushing the coil under heavier power cables when trays are shared. In under-floor runs, lay the cord flat rather than coiled on edge, and leave the factory coil memory to relax before final dressing. The steel tube holds its shape well, which makes neat right-angle exits from managers easier than with loose-buffered leads.

Length choices and custom production

Standard cable lengths are stocked for fast delivery: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft) and 30m (98ft), covering the common rack-to-rack, access and frame connections this cord is built for. Lengths built to order beyond this range are manufactured to order. Since every extra meter of 50/125µm glass adds attenuation at 850nm, for multimode channels, keeping the cord close to the true pathway length additionally protects the link budget,. Specifying the specific pathway length avoids both the slack storage problem of an overlong cord and the strain risk of one that is too short.

Quality assurance and factory testing

Each cord is terminated with precision zirconia ferrule LC connectors and measured for insertion loss and return loss before packing; the 0.3dB ceiling is a verified test limit. End-face geometry is inspected for consistent physical contact, and ferrules are rated for up to one thousand mating cycles in frequently reconfigured patching fields. In Singapore facilities, this check should form part of the rack-access and acceptance review.

Quotation and Factory Support

Use against the LC-LC OM4 duplex armored range and state the pathway length and jacket rating. Non-standard colors, APC polish or alternative connectors are handled through the custom duplex armored program; send the requirement with the enquiry and the factory confirms the manufacturable specification before manufacturing begins. Singapore and regional project orders can be reviewed for interface compatibility, packing details and delivery coordination.