SC UPC Simplex Armored Fiber Patch Cable, OS2, Riser (OFCR)

Singapore high-density designs should assess this item together with panel access, cable routing and the complete optical loss allowance. This simplex armored patch cable runs one OS2 9/125µm single-mode fiber between two SC UPC connectors, wrapped in a helical stainless steel tube under the blue 3.0mm riser-rated (OFCR) jacket. It suits the long tail of equipment that still speaks SC UPC: media converters, legacy ODFs, industrial switches and test sets that now sit at the exposed edge of the network. In Singapore facilities, this check should form part of the rack-access and acceptance review.

Product Highlights

• Stock lengths 1m to 30m; custom lengths and jackets on request
• SC UPC to SC UPC simplex, OS2 9/125µm single mode
• Helical stainless steel armor against crush, impact and rodents
• G.657.A1 bend-insensitive fiber, 10/5D bend radius
• Riser (OFCR) flame rating for vertical building pathways
• Insertion loss ≤0.3dB, return loss ≥50dB

Specifications

Simplex SC for BiDi optics and single-fiber links

Bidirectional transceivers put both directions on one strand, and a simplex SC cord is the natural patching format for them. The corresponding build serves WDM monitor ports, optical taps and any channel where only one fiber is lit. Patching with a single-fiber cord keeps the unused side of the frame free and makes the strand easy to trace months later.

Where SC UPC remains the standard

Media converters, older carrier CPE, industrial Ethernet switches and much existing ODF hardware still present SC UPC ports. The push-pull SC body is tolerant of frequent handling and easy to clean and check, which keeps it in service long after LC took over the transceiver side. This cord lets that plant stay exactly as documented while gaining armored protection.

Armor under the floor and behind the wall

Simplex tails commonly disappear into places nobody inspects again: beneath raised floors, behind wall boxes, along baseboards in retrofit offices. Those are precisely the routes where unarmored leads get crushed or chewed. The helical steel tube inside this cord carries the mechanical rating; consequently, the pathway needs no conduit and the channel survives the life of the building.

Media converters and industrial links

A large share of simplex SC UPC demand comes from media converters and industrial Ethernet gear linking control rooms to field cabinets. These links run for years in cabinets that get opened monthly; consequently, the cord is handled far more than a data-center jumper. The armored build and the 1000-cycle ferrule rating are aimed at exactly that service pattern, and the stock lengths cover the usual cabinet-to-frame distances.

Length choices and custom production

Standard cable lengths are stocked for fast delivery: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft) and 30m (98ft), covering the common rack-to-rack, access and frame connections this cord is built for. Lengths built to order beyond this range are manufactured to order. Because simplex tails are frequently dressed into tight enclosures, ordering the measured length avoids the coil of slack that otherwise ends up trapped behind the patch panel. Specifying the specific pathway length avoids both the slack storage problem of an overlong cord and the strain risk of one that is too short.

Quality assurance and factory testing

Every cord is terminated with precision zirconia ferrule SC connectors and verified for insertion loss and return loss before packing; the 0.3dB and 50dB figures are tested figures on each product. End-face geometry is inspected for consistent and repeatable physical contact, and the ferrules are rated for up to one thousand mating cycles.

Quotation and Factory Support

Refer to the SC UPC simplex armored range during the request for a quotation, stating the pathway length and jacket rating. Other connector mixes and polish types, including hybrid builds, are handled through the custom simplex armored program once the factory confirms the specification. Singapore and regional project orders can be reviewed for interface compatibility, packing details and delivery coordination.