Customized MMC-16 Trunk Cable, 16-384Customized MMC-16 Trunk Cable, 16-384 Fibers, OS2
Singapore high-density designs should assess this item together with panel access, cable routing and the complete optical loss allowance. The custom MMC-16 trunk is an OS2 backbone product built around MMC connectors based on sixteen-fiber sub-units. Fiber capacity may scale from 16 to 384 fibers, with cable outside diameter from 4.0 to 17.5mm depending on the selected structure. G.657.A1 glass, APC polish and an OFNP jacket feature the foundation for project-specific single-mode distribution.
Product Highlights
- MMC to MMC, 16-384 Fibers
- OS2 9/125μm, G.657.A1
- MMC insertion loss ≤0.35dB, return loss ≥60dB
- Trunk/ Extender Polarity wiring scheme
- 4.0-17.5mm Plenum (OFNP) cable
- Length and fiber count manufactured to the project requirement
Specifications
| Part Number | XXMMCSMF |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MMC |
| Connector B | US Conec MMC |
| Polish Type | APC to APC |
| Glass Fiber | G.657.A1 |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Fiber Count | 16-384 Fibers |
| Polarity | Trunk/ Extender Polarity |
| Cable Outside Diameter (OD) | 4.0-17.5mm |
| Cable Jacket | Plenum (OFNP) |
| Min. Bend Radius (Optical Fiber) | 10mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Tensile Strength (Long Term) | 200-400N |
| Tensile Strength (Short Term) | 660-1320N |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥60dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) |
| Storage Temperature | -10 to 70°C (14 to 158℉) |
Engineering the fiber count and cable structure
A trunk must not be treated as just a longer jumper. As fiber count increases, sub-unit arrangement, cable diameter, pulling strength and breakout protection become part of the design. This MMC-16 range supports trunk or extender polarity and 200–400N long-term tensile ratings, with 660–1320N short-term ratings across the structure range. The specific figures appropriate to an order should be confirmed on its production plan.
Backbone routes and panel coordination
Typical uses give links between optical distribution frames, equipment rows and high-density MMC panels. Pre-termination permits numerous fibers to be existing in one pull and tested before arrival. The termination schedule should specify every sub-unit, connector polarity and gender transition so the backbone assembly lands correctly. High fiber counts additionally require ample rear cable management and static bend space.
Specifying a made-to-project trunk
There is no assumed stock length for this custom product. Document the pathway length in feet or meters, overall fiber count, MMC connector gender, polarity, breakout lengths, jacket specifications and marking. Pulling eyes or other deployment protection may also be discussed where the pathway requires them. Length, diameter and tensile structure are confirmed collectively rather than selected individually.
Ordering and Factory Support
Use XXMMCSMF as the MMC-16 trunk range reference and attach a fiber schedule or plan. A practical enquiry includes fiber count, sub-unit map, connector gender, polarity, deployment conditions and length, allowing the factory to use the specified engineered product. Singapore and regional project orders can be reviewed for interface compatibility, packing details and delivery coordination.
