MMC-16 to MMC-16 APC Jumper, 16 FibersMMC-16 to MMC-16 APC Jumper, 16 Fibers, OS2
Singapore high-density designs should assess this item together with panel access, cable routing and the complete optical loss allowance. The 16FMMCSMF jumper links two MMC-16 APC female interfaces with sixteen OS2 fibers in a single 2.5mm plenum cable. It is specified for dense single-mode patching where a compact connector footprint and controlled fiber map matter as much as optical loss. G.657.A1 glass supports routing through crowded managers without abandoning single-mode bend performance.
Product Highlights
- MMC Female to MMC Female, 16 Fibers
- OS2 9/125μm, G.657.A1
- MMC insertion loss ≤0.35dB, return loss ≥60dB
- Jumper Polarity wiring scheme
- 2.5mm Plenum (OFNP) cable
- Standard length options: 1m (3ft), 2m (7ft), 3m (10ft)
Specifications
| Part Number | 16FMMCSMF |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MMC Female (Non-Pinned) |
| Connector B | US Conec MMC Female (Non-Pinned) |
| Polish Type | APC to APC |
| Glass Fiber | G.657.A1 |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Fiber Count | 16 Fibers |
| Polarity | Jumper Polarity |
| Cable Outside Diameter (OD) | 2.5mm |
| Cable Jacket | Plenum (OFNP) |
| Min. Bend Radius (Optical Fiber) | 10mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Tensile Strength (Long Term) | 30N |
| Tensile Strength (Short Term) | 100N |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥60dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) |
| Storage Temperature | -10 to 70°C (14 to 158℉) |
Where this MMC-to-MMC jumper fits
Use this terminated assembly between MMC adapter positions or other non-pinned MMC link points in a structured cabling path. Both connector interfaces are female; consequently, the mating interface must feature the corresponding guide pins. It must not be treated as a generic replacement for an LC duplex cord: the sixteen fibers remain in one multi-fiber interface at each end, making the completed jumper most practical in parallel-optics and high-density panel environments.
Optical budget and routing details
Each MMC link is specified at 0.35dB maximum insertion loss and at least 60dB return loss. Those figures belong in the path calculation alongside every adapter and trunk in the pathway. This optical cable has a 10mm minimum fiber bend radius and a 20/10D dynamic/static cable bend requirement; leave ample space behind the patch panel to meet those limits rather than forcing the boot into a sharp turn.
Lengths, polarity and incoming inspection
Standard cable lengths are 1m (3ft), 2m (7ft) and 3m (10ft), with other lengths obtainable in feet or meters. The specified model uses jumper polarity, which should be checked against the full channel rather than assumed from this connector interface shape alone. review APC-to-APC compatibility, check both ferrules and make sure of that the patch panel key orientation matches this connector interface before connector engagement.
Ordering and Factory Support
Use 16FMMCSMF with the correct length and quantity. For a non-standard pathway, give the desired length, marking and packaging particulars; our personnel may additionally assess polarity and gender against the termination schedule before manufacturing begins. Singapore and regional project orders can be reviewed for interface compatibility, packing details and delivery coordination.
