100G QSFP28 ER 4x 25G NRZ 1310nm 40km100G QSFP28 ER 4x 25G NRZ 1310nm 40km Duplex LC/UPC Single Lambda Module, Cisco
The 100G QSFP28 ER 4x 25G NRZ 1310nm 40km Duplex LC/UPC Single Lambda Module, Cisco is a hot-pluggable QSFP28 transceiver rated at 100 Gbps. Using a Duplex LC optical interface over SMF at 1310nm[Lane Center Wavelengths RangeTX 1308.09-1310.19 RX 1304.5-1317.5], it covers transmission distances up to 40km. Compliance with SFF-8636 Rev 2.10a, SFF-8679 V1.8, 100G lambda MSA 100G-ER1-40, QSFP28 MSA, together with integrated diagnostic monitoring, makes it a dependable choice for 100G Ethernet, data center interconnect and 5G transport networks.
Product Highlights
- QSFP28 form factor, 100 Gbps data rate
- Wavelength: 1310nm[Lane Center Wavelengths RangeTX 1308.09-1310.19 RX 1304.5-1317.5]
- Connector: Duplex LC
- Reach: up to 40km
- Fiber media: SMF
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | QSFP-ER-100G |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP28 |
| Max Data Rate | 100 Gbps |
| Wavelength | 1310nm[Lane Center Wavelengths RangeTX 1308.09-1310.19 RX 1304.5-1317.5] |
| Max Cable Distance | 40km |
| Connector | Duplex LC |
| Media | SMF |
| Transmitter Type | EML |
| Receiver Type | PIN |
| TX Power | 1.7~7.1 dBm |
| Minimum Receiver Power | -16 dBm |
| Power Budget | 17.7dB |
| Receiver Overload | -3.4 dBm |
| Power Consumption | ＜5.5W |
| Extinction Ratio | >5 dB |
| DOM | Supported |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation (Electrical) | 4x 25G-NRZ |
| Modulation (Optical) | 1x 100G-PAM4 |
| Protocols | SFF-8636 Rev 2.10a, SFF-8679 V1.8, 100G lambda MSA 100G-ER1-40, QSFP28 MSA |
Applications
In 100G Ethernet, data center interconnect and 5G transport networks, the 100G QSFP28 ER 4x 25G NRZ 1310nm 40km Duplex LC/UPC Single Lambda Module, Cisco delivers 100 Gbps transmission over SMF with a reach of 40km. With its Duplex LC optical interface, the module works directly with the SMF infrastructure already installed in most facilities. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment.
Standards and Compatibility
This product is designed and tested to comply with SFF-8636 Rev 2.10a, SFF-8679 V1.8, 100G lambda MSA 100G-ER1-40, QSFP28 MSA. It plugs into any standards-based QSFP28 port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
Order this product as QSFP-ER-100G. Common models are stocked for fast dispatch. We can supply the module with neutral or customer-branded labels, and compatibility coding for a specific equipment vendor can be added at no extra process step.
Package
Products are first packed into blister trays or self-sealed bags and then into cartons. Standard labels and marks are applied by default, and customized packing and labeling are available on request.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
