100G QSFP28 BX10 4x 25G NRZ100G QSFP28 BX10 4x 25G NRZ 1331nm-TX/1271nm-RX 10km Simplex LC/UPC Module, Cisco
Designed for 100G Ethernet, data center interconnect and 5G transport networks, the 100G QSFP28 BX10 4x 25G NRZ 1331nm-TX/1271nm-RX 10km Simplex LC/UPC Module, Cisco provides 106.25Gbps throughput in a QSFP28 form factor. It operates at 1331nm-TX/1271nm-RX over SMF through a Simplex LC/UPC connector and supports link lengths up to 10km. The module meets QSFP28 MSA, SFF-8636,IEEE 802.3bs , CAUI-4 and includes digital diagnostic monitoring for live status readout.
Product Highlights
- QSFP28 form factor, 106.25Gbps data rate
- Wavelength: 1331nm-TX/1271nm-RX
- Connector: Simplex LC/UPC
- Reach: up to 10km
- Fiber media: SMF
- DDM/DOM: Supported
Specifications
| Part Number | QSFP-BX10-100G |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP28 |
| Max. Data Rate | 106.25Gbps |
| Wavelength | 1331nm-TX/1271nm-RX |
| Max. Cable Distance | 10km |
| Connector | Simplex LC/UPC |
| Media | SMF |
| Transmitter Type | DFB |
| Receiver Type | PIN |
| TX Power | -1.9-4.8dBm |
| Minimum Receiver Power | -8.2dBm |
| Power Budget | 6.3dB |
| Receiver Overload | 4.8dBm |
| Max. Power Consumption | <4W |
| Extinction Ratio | >3.5dB |
| DDM/DOM | Supported |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation (Electrical) | 4x 25G-NRZ |
| Modulation (Optical) | 1x 100G-PAM4 |
| Bit Error Ratio (BER) | DSP |
| Packaging Technology | TO |
| Protocols | QSFP28 MSA, SFF-8636,IEEE 802.3bs , CAUI-4 |
Applications
Network architects choose the 100G QSFP28 BX10 4x 25G NRZ 1331nm-TX/1271nm-RX 10km Simplex LC/UPC Module, Cisco for 100G Ethernet, data center interconnect and 5G transport networks: it runs 106.25Gbps over SMF and reaches 10km. The Simplex LC/UPC interface and 1331nm-TX/1271nm-RX optics match the standard cabling plant used in modern data halls, so existing trunks can be reused. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment.
Standards and Compatibility
This product is designed and tested to comply with QSFP28 MSA, SFF-8636,IEEE 802.3bs , CAUI-4. It plugs into any standards-based QSFP28 port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
Our part number for this module is QSFP-BX10-100G. When ordering, just let us know the quantity and whether you need the compatibility coding for a particular switch brand; labeling and packaging can also follow your channel requirements.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
