QSFP-40/100-SRBDCisco QSFP-40/100-SRBD Compatible 100G QSFP28 SM4 Transceiver Module
Built for hosts recognizing QSFP-40/100-SRBD, this HT-manufactured QSFP28 module delivers 100G transmission at 850/880/910/940nm. Its rated reach is 100G: 75m on OM3 / 100m on OM4 / 150m on OM540G: 240m on OM3 / 350m on OM4 / 440m on OM5, with Duplex LC as the physical interface. The specifications and engineering guidance below support high-density deployments balance optical performance, port access and thermal planning, while keeping HT manufacture separate from the OEM cross-reference.
OEM Part Number: QSFP-40/100-SRBDHT Part Number: QSFP-MBIDI-100G
Product Highlights
- Compatible alternative to Cisco QSFP-40/100-SRBD
- 100G connectivity at Dual Rate 40 Gbps and 100 Gbps
- Optical wavelength: 850/880/910/940nm
- Specified reach: 100G: 75m on OM3 / 100m on OM4 / 150m on OM540G: 240m on OM3 / 350m on OM4 / 440m on OM5
- Duplex LC / MMF interface
- Digital diagnostic monitoring: Supported
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Cisco Compatible | QSFP-40/100-SRBD |
|---|---|
| Manufacturer | HT |
| HT Part Number | QSFP-MBIDI-100G |
| Form Factor | QSFP28 |
| Max. Data Rate | Dual Rate 40 Gbps and 100 Gbps |
| Wavelength | 850/880/910/940nm |
| Max. Cable Distance | 100G: 75m@OM3/100m@OM4/150m@OM540G: 240m@OM3/350m@OM4/440m@OM5 |
| Connector | Duplex LC |
| Media | MMF |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| TX Power | 100G: -7.5~2 dBm 40G: -7.5~3 dBm |
| Minimum Receiver Power | 100G: L0: -9.5dBm, L1: -9.4dBm, L2: -9.4dBm, L3: -9.4dBm 40G: L0: -12.9dBm, L1: -12.5dBm, L2: -12.2dBm, L3: -11.9dBm |
| Power Budget | 100G: 1.9dB40G: 2dB |
| Receiver Overload | 100G: 3.4 dBm40G: 2.4 dBm |
| Power Consumption40G | ≤3.5W |
| Extinction Ratio | ＞2 dB |
| DDM/DOM | Supported |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation (Electrical) | 4x 25G-NRZ |
| Modulation (Optical) | 4x 25G-NRZ |
| Protocols | SWDM MSA, QSFP28 MSA, IEEE802.3bm CAUI-4 |
Applications and Optical Link Design
Typical deployments include switch-to-switch, switch-to-server and aggregation links inside a data hall or between adjacent equipment rooms. The Duplex LC interface connects to the specified multimode cabling, and the stated reach depends on fiber grade and link loss. Keep this interface on the matching multimode optical standard rather than connecting it directly to a single-mode wavelength or reach variant.
Before deployment, check the host port type, supported data rate and firmware requirements. The 100G interface configuration must match the remote equipment; sharing a QSFP28 housing alone does not make two transceiver types interoperable.
For this multimode module, confirm fiber grade, modal bandwidth and total loss before commissioning. The 100G: 75m on OM3 / 100m on OM4 / 150m on OM540G: 240m on OM3 / 350m on OM4 / 440m on OM5 figure applies only under suitable cabling conditions. Inspect every Duplex LC mating point and match the remote optical standard.
Quality Assurance and Packaging
Before packing, the module receives interface inspection, identification and link checks. Protective packaging avoids pressure on the connector and latch. Customer references, rack groups and project packing lists can be added for volume orders.
Optical Acceptance, Diagnostics and Handling
For this model, the specified transmit-power range is 100G: -7.5~2 dBm 40G: -7.5~3 dBm; the stated optical power budget is 100G: 1.9dB40G: 2dB. Digital diagnostics make later maintenance easier when baseline values are captured at installation. Save the initial readings with the port and OEM reference, then investigate meaningful changes rather than reacting to a single transient value. Diagnostic support depends on the host as well as the module, so unavailable fields should be confirmed with the platform documentation. Diagnostic monitoring is listed as Supported. Before every insertion, keep dust caps in place until the patch lead is ready, avoid touching the optical end face and use an appropriate inspection and cleaning procedure. Do not look into an active optical interface.
High-Density Port and Thermal Planning
In a densely populated chassis, connector access and airflow form part of the optical-link design. Confirm that neighboring modules and patch leads leave room for latch operation, and include listed power consumption in the host thermal budget. Assess port density together with fiber management. For this model, the principal parameters are data rate Dual Rate 40 Gbps and 100 Gbps, wavelength 850/880/910/940nm, rated reach 100G: 75m on OM3 / 100m on OM4 / 150m on OM540G: 240m on OM3 / 350m on OM4 / 440m on OM5.
Ordering Information
When ordering, specify QSFP-40/100-SRBD, QSFP-MBIDI-100G, quantity and intended host platform. Project labels can repeat these details for receiving and asset records. Neutral labels, customer packaging and project-specific compatibility review are available on request.
Cisco Compatibility and Factory Testing
Factory verification starts with the expected QSFP-40/100-SRBD identity and finishes with an operating host link. EEPROM data, diagnostic visibility and the stated optical parameters are assessed together. Equipment model, hardware revision and software release can be reviewed before dispatch where platform behavior is uncertain.
Frequently Asked Questions
Is this an original Cisco transceiver?
No. It is an HT-manufactured compatible alternative for equipment that specifies QSFP-40/100-SRBD, not an original Cisco-branded module.
Which fiber and connector are required?
Use Duplex LC with MMF. The specified maximum reach is 100G: 75m on OM3 / 100m on OM4 / 150m on OM540G: 240m on OM3 / 350m on OM4 / 440m on OM5, subject to fiber quality and total link loss.
Can it be mixed with another wavelength or reach version?
Only when the two ends share the same optical standard, wavelength plan and supported data rate. Check the exact part numbers and link budget rather than relying only on the module form factor.
Shipping and Lead Time
Standard configurations normally ship within one to three working days, with production lead times confirmed for larger quantities. International courier, air freight and sea freight are available; customer courier accounts and nominated forwarders are accepted.
