AristaArista Compatible 800G OSFP ZRP Optical Transceiver
The Arista Compatible 800G OSFP ZRP Optical Transceiver is a hot-pluggable OSFP transceiver rated at 850Gbps (8x 106.25Gbps). Using a Duplex LC/UPC optical interface over SMF at 1528.77~1567.13nm, it covers transmission distances up to Amplified: >500km Unamplified: ≤44km. Compliance with OSFP MSA Rev5.0, IEEE 802.3-2022, OpenZR+ MSA, CMIS 5.2, together with integrated diagnostic monitoring, makes it a dependable choice for data center interconnect, metro transport and carrier aggregation networks.
Product Highlights
- OSFP form factor, 850Gbps (8x 106.25Gbps) data rate
- Wavelength: 1528.77~1567.13nm
- Connector: Duplex LC/UPC
- Reach: up to Amplified: >500km Unamplified: ≤44km
- Fiber media: SMF
- DDM/DOM: Supported
Specifications
| Part Number | OSFP-ZRP-800G |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP |
| Max. Data Rate | 850Gbps (8x 106.25Gbps) |
| Wavelength | 1528.77~1567.13nm |
| Max. Cable Distance | Amplified: >500km Unamplified: ≤44km |
| Connector | Duplex LC/UPC |
| Media | SMF |
| Inbuilt FEC | OFEC |
| TX Power | -12~-6dBm |
| RX Power | Rx total input power: 30~7dBm Amplified: At Rx OSNR tolerance value with no CD: OIF 800ZR / ZR800-OFEC-16QAM: -9~-2dBm ZR600-OFEC-8QAM: -13~-2dBm ZR400-OFEC-QPSK: -15~-2dBm At Rx OSNR tolerance value with no CD plus 1.0 dB: OIF 800ZR: -11~-1dBm ZR800-OFEC-16QAM: -13~-1dBm ZR600-OFEC-8QAM: -16~-1dBm ZR400-OFEC-QPSK: -18~-1dBm Unamplified: OIF 800ZR: -18~0dBm ZR800-OFEC-16QAM: -18~0dBm ZR600-OFEC-8QAM: -21~0dBm ZR400-OFEC-QPSK: -24~0dBm |
| Power Consumption | 28W: OIF 800ZR, 800GAUI-8-S C2M, CD compensation=1600ps/nm 30W: OIF 800ZR, 800GAUI-8-S C2M, CD compensation=2400ps/nm 31W: OpenZR+ ZR800-OFEC-16QAM, 800GAUI-8-S C2M, CD compensation=9000ps/nm |
| DDM/DOM | Supported |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation (Optical) | DP-QPSK/8QAM/16QAM |
| Modulation (Electrical) | 8x100G-PAM4 |
| Bit Error Ratio (BER) | Pre FEC: 3E-3 Post FEC: 1E-15 |
| Application | LH/Regional/Metro/ROADMs |
| Protocols | OSFP MSA Rev5.0, IEEE 802.3-2022, OpenZR+ MSA, CMIS 5.2 |
Applications
The Arista Compatible 800G OSFP ZRP Optical Transceiver is used in data center interconnect, metro transport and carrier aggregation networks, where it provides an 850Gbps (8x 106.25Gbps) link over SMF up to Amplified: >500km Unamplified: ≤44km. The Duplex LC/UPC interface and 1528.77~1567.13nm optics match the standard cabling plant used in modern data halls, so existing trunks can be reused. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request. The link runs 8x100G-PAM4 modulation, which keeps it aligned with current 800G switch silicon.
Standards and Compatibility
Compliance: OSFP MSA Rev5.0, IEEE 802.3-2022, OpenZR+ MSA, CMIS 5.2. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
Our part number for this module is OSFP-ZRP-800G. When ordering, just let us know the quantity and whether you need the compatibility coding for a particular switch brand; labeling and packaging can also follow your channel requirements.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
Shipping and Lead Time
Standard products are held in stock and usually ship within one to three working days. We dispatch worldwide by DHL, UPS, FedEx, TNT or EMS, and for bulk orders we arrange air or sea freight. Shipments can also be sent collect on your own courier account or delivered to your freight forwarder.
Tested Before Shipment
We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.
Packaging Options
Default packaging is simple and protective: sealed bag, blister tray, export carton. For OEM customers we also offer white-label packing, custom printed boxes and per-unit labeling with your own part numbers, so the goods can go straight into your sales channel.
