800G OSFP IHS/Finned Top to 4x 200G OSFP800G OSFP IHS/Finned Top to 4x 200G OSFP RHS/Flat Top Passive Breakout DAC Cable
The 800G OSFP IHS/Finned Top to 4x 200G OSFP RHS/Flat Top Passive Breakout DAC Cable is a passive twinax direct attach copper cable with Single-port 800G OSFP (IHS/Finned Top) to 4× 200G OSFP (RHS/Flat Top), supporting 800Gbps links over a length of Customized. As a passive cable it draws essentially no power and adds no latency to the link. It is a cost effective, low latency interconnect for 800G Ethernet data center and cloud network environments, and complies with OSFP MSA, IEEE 802.3ck, CMIS v4.0.
Product Highlights
- Single-port 800G OSFP (IHS/Finned Top) to 4× 200G OSFP (RHS/Flat Top)
- Data rate: 800Gbps
- Cable type: Passive Twinax
- Length: Customized
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-4OFLPCxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | Single-port 800G OSFP (IHS/Finned Top) to 4× 200G OSFP (RHS/Flat Top) |
| Max Data Rate | 800Gbps |
| Media | Copper |
| Cable Type | Passive Twinax |
| Cable Length | Customized |
| Wire AWG | 28-30AWG |
| Minimum Bend Radius | 26-31mm |
| Max. Power Consumption | 0.1W (800G End) 0.1W (200G Per End) |
| Jacket Material | PVC |
| Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | OSFP MSA, IEEE 802.3ck, CMIS v4.0 |
| Modulation Format | 8x 100G PAM4 to Quad 2x 100G PAM4 |
Applications
The 800G OSFP IHS/Finned Top to 4x 200G OSFP RHS/Flat Top Passive Breakout DAC Cable connects Single-port 800G OSFP (IHS/Finned Top) to 4× 200G OSFP (RHS/Flat Top) ports at 800Gbps in 800G Ethernet data center and cloud network environments. Ordered in customized lengths, it matches the actual rack geometry without slack. Because the assembly is factory terminated and tested as a complete link, installation is plug and play on both ends. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.
Standards and Compatibility
Compliance: OSFP MSA, IEEE 802.3ck, CMIS v4.0. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
This cable is built to order in customized lengths. Our part number OSFP-800G-4OFLPCxxx identifies the configuration. When placing an order, tell us the length you need and any label or packaging requirements.
Shipping and Lead Time
Standard products are held in stock and usually ship within one to three working days. We dispatch worldwide by DHL, UPS, FedEx, TNT or EMS, and for bulk orders we arrange air or sea freight. Shipments can also be sent collect on your own courier account or delivered to your freight forwarder.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
Packing Details
Standard packing is an anti-static bag plus blister protection, with cartons sized to keep products from moving in transit. We apply our standard labels by default; neutral packing or customer-branded labels, part number stickers and serial barcodes are all available on request.
OEM and Custom Orders
We have manufactured fiber optic connectivity products since 1995 and run our own production lines in Shenzhen. Beyond the standard catalog we build to order: special cable lengths, custom connector combinations, vendor-specific compatibility coding and private labeling. Send us your requirement and our engineers will quote a practical solution.
