MTP-8 APC to LC UPC Uniboot Trunk CableMTP-8 APC to LC UPC Uniboot Trunk Cable, Female, 32 Fibers, OS2, Type B
This 32 Fibers (Base-8) MTP® Elite Female trunk assembly is built for backbone cabling between racks, rows and distribution frames. OS2 9/125μm fiber, Plenum (OFNP) jacket and factory installed pulling protection make it a one-pull replacement for hours of field termination work.
Standard lengths are 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft) and 40m (131ft). Because we are the manufacturer, any other length between or beyond these steps can be produced on request, with your choice of jacket color, labeling and packaging.
Product Highlights
- MTP® Elite Female (Non-Pinned) to LC Duplex Uniboot, 32 Fibers (Base-8)
- OS2 9/125μm, G.657.A1
- Insertion loss ≤0.35dB, return loss ≥65dB
- Type B polarity
- 5.5-5.6mm Plenum (OFNP) round cable
- Minimum bend radius 10mm
- Ten standard lengths from 1m (3ft) to 40m (131ft), custom lengths built to order
Specifications
| Part Number | HD-32FMTPLCSMF |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP® Elite Female (Non-Pinned) |
| Connector B | LC Duplex Uniboot |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Polish Type | APC (MTP®) to UPC (LC) |
| Polarity | Type B |
| Cable Jacket | Plenum (OFNP) |
| Fiber Count | 32 Fibers (Base-8) |
| Glass Fiber | G.657.A1 |
| Cable Structure | Double Jacket |
| Minimum Bend Radius | 10mm |
| Cable Outside Diameter (OD) | 5.5-5.6mm |
| Breakout Outside Diameter (OD) | 2.0mm |
| Breakout Length | 0.84m (MTP®), 0.91m (LC) |
| Long-term Tensile Load | 200N |
| Short-term Tensile Load | 600N |
| MTP Connector Count | 4 |
| LC Connector Count | 16 |
| MTP Connector IL | ≤0.35dB |
| LC Connector IL | ≤0.20dB |
| MTP Connector RL | ≥65dB |
| LC Connector RL | ≥55dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) |
| Storage Temperature | -10 to 70°C (14 to 158℉) |
Applications
Backbone cabling is where mistakes cost the most, so this trunk is built and verified entirely in the factory. The 32 Fibers (Base-8) construction concentrates the equivalent of many duplex jumpers into a single assembly, which is exactly what high density spine and leaf cabling needs. It arrives with test results, labeled legs and the correct polarity for your panel layout.
Trunk Construction and Polarity
The trunk uses a double jacket design: a rugged outer sheath protects the whole bundle, while each breakout leg keeps its own jacket and numbering. Base-8 and Base-12 constructions are available depending on the fiber count. Polarity follows the Type shown in the table, and pulling eyes or mesh grips can be fitted for installation.
Ordering Information
Please reference HD-32FMTPLCSMF in your enquiry. The 1m (3ft) version is the standard model; Our sales team can also advise on polarity, gender and jacket choices if your project documentation is not final yet.
How We Pack
Each assembly is coiled, capped and sealed in an individual bag, then packed into foam lined export cartons. Test reports can be attached per unit or per batch, and carton marks follow your shipping instructions.
Built to Your Spec
We have manufactured fiber optic assemblies since 1995. MPO and MTP cabling is one of our core lines: fiber counts from 8 to 144, single mode and multimode, UPC and APC polish, trunk, jumper, harness and breakout formats. Send your drawing and we turn it into a ready to install assembly.
Quality and Testing
Our test routine covers insertion loss, return loss and ferrule end face inspection on every assembly. Because testing is done in-house, custom variants receive exactly the same verification as standard models.
