Customized MTP-12 Trunk Cable, 12-576FCustomized MTP-12 Trunk Cable, 12-576F, OS2
This 12-576 Fibers (Base-12) MTP® Elite Female/Male trunk assembly is built for backbone cabling between racks, rows and distribution frames. OS2 9/125μm fiber, Plenum (OFNP)/LSZH jacket and factory installed pulling protection make it a one-pull replacement for hours of field termination work.
Available lengths are 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- MTP® Elite Female/Male to MTP® Elite Female/Male, 12-576 Fibers (Base-12)
- OS2 9/125μm, G.657.A1
- Insertion loss ≤0.35dB (0.15dB Typ.), return loss ≥65dB
- Type A/Type B/Type C polarity
- Plenum (OFNP)/LSZH
- Minimum bend radius 10mm
- Stock lengths from 2m (7ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | XXMTPSMF |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP® Elite Female/Male |
| Connector B | US Conec MTP® Elite Female/Male |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Glass Fiber | G.657.A1 |
| Minimum Bend Radius | 10mm |
| Polish Type | APC to APC |
| Polarity | Type A/Type B/Type C |
| Cable Jacket | Plenum (OFNP)/LSZH |
| Cable Structure | Double Jacket |
| Fiber Count | 12-576 Fibers (Base-12) |
| Trunk Outside Diameter (OD) | 3.6-21mm |
| Breakout Outside Diameter (OD) | 2.0mm |
| Breakout Length | 0.84m |
| Insertion Loss | ≤0.35dB (0.15dB Typ.) |
| Return Loss | ≥65dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Long-term Tensile Load | 100-200N |
| Short-term Tensile Load | 300-660N |
| Operating Temperature | OFNP: -10 to 60°C (14 to 140°F)LSZH: -10 to 70°C (14 to 158°F) |
| Storage Temperature | OFNP: -10 to 70°C (14 to 158°F)LSZH: -20 to 70°C (-4 to 158°F) |
Applications
Typical uses include backbone links between the main distribution area and equipment rows, vertical risers between floors, and inter-cabinet trunks in large data halls. A 12-fiber MPO interface carries 8 active lanes for 40G SR4 and 100G SR4 links, leaving the remaining 4 fibers dark, exactly as the MSA wiring specifies. Pre-termination cuts installation time dramatically compared with field splicing.
Trunk Construction and Polarity
The trunk uses a double jacket design: a rugged outer sheath protects the whole bundle, while each breakout leg keeps its own jacket and numbering. Base-8 and Base-12 constructions are available depending on the fiber count. Polarity follows the Type shown in the table, and pulling eyes or mesh grips can be fitted for installation.
Ordering Information
To order, quote XXMTPSMF together with the length and quantity you need. Private labeling, custom packaging and project specific documentation are all handled in-house.
Built to Your Spec
Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.
How We Pack
Products are packed in anti-static or PE bags with connector dust caps fitted, then boxed in sturdy export cartons. Custom labels, barcodes and carton markings are available on request.
Quality and Testing
Our test routine covers insertion loss, return loss and ferrule end face inspection on every assembly. Because testing is done in-house, custom variants receive exactly the same verification as standard models.
