Customized MTP-12 Jumper, 8-288F, OM4
This Customized MTP-12 Jumper, 8-288F, OM4 MTP® Elite Female/Male jumper is factory terminated and fully tested in our own facility, built on OM4 50/125μm fiber with a Plenum (OFNP)/LSZH/Riser (OFNR) jacket. It is designed for high density patching inside data center cabinets, where pre-terminated cabling saves hours of field splicing and keeps polarity under control from day one.
Available lengths are 1m (3ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- MTP® Elite Female/Male to MTP® Elite Female/Male,
- OM4 50/125μm, bend insensitive fiber
- Insertion loss ≤0.35dB, return loss ≥27/45dB (UPC/APC)
- Plenum (OFNP)/LSZH/Riser (OFNR)
- Minimum bend radius 7.5mm
- Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | XXMTPOM4 |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP® Elite Female/Male |
| Connector B | US Conec MTP® Elite Female/Male |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Polish Type | UPC/APC |
| Cable Jacket | Plenum (OFNP)/LSZH/Riser (OFNR) |
| Trunk Outside Diameter (OD) | 3.0mm-23.0mm |
| Glass Fiber | Bend Insensitive Fiber |
| Connector Durability | 500 times |
| Minimum Bend Radius | 7.5mm |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥27/45dB (UPC/APC) |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | Plenum (OFNP): -10 to 60°C (14 to 140°F)Riser (OFNR)/LSZH: -10 to 70°C (14 to 158°F) |
| Storage Temperature | Plenum (OFNP): -10 to 70°C (14 to 158°F)Riser (OFNR)/LSZH: -20 to 70°C (-4 to 158°F) |
Applications
Use this jumper anywhere a short multi-fiber connection is needed: panel to equipment, cassette to cassette, or switch to switch within a row. Because it arrives polished and tested, the installer only needs to route and connect it.
Polarity and Gender Options
Choosing the right polarity is the key to a working MPO link. As a factory we build Type A, Type B and Type C versions of this cable, with male or female connectors on either end. If you are migrating an existing install, send us the current panel layout and we will confirm the correct combination before production.
Ordering Information
Please reference XXMTPOM4 in your enquiry. Our sales team can also advise on polarity, gender and jacket choices if your project documentation is not final yet.
Built to Your Spec
We have manufactured fiber optic assemblies since 1995. MPO and MTP cabling is one of our core lines: fiber counts from 8 to 144, single mode and multimode, UPC and APC polish, trunk, jumper, harness and breakout formats. Send your drawing and we turn it into a ready to install assembly.
Quality and Testing
Every MPO/MTP assembly leaving our factory is 100% tested for insertion loss and return loss, with end face geometry checks on the multi-fiber ferrules. Controlled polishing keeps the loss budget stable across the whole batch, which matters when several mated pairs sit in one link.
How We Pack
Each assembly is coiled, capped and sealed in an individual bag, then packed into foam lined export cartons. Test reports can be attached per unit or per batch, and carton marks follow your shipping instructions.
