Customized MPO-24 Jumper, 24-192F, OM4
Factory assembled MPO Female/Male jumper cable with Customized MPO-24 Jumper, 24-192F, OM4, OM4 50/125μm and Plenum (OFNP)/LSZH jacket. Every unit is measured for insertion loss and return loss before packing, so the link budget you calculate on paper is the one you get in the rack.
Available lengths are 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- MPO Female/Male to MPO Female/Male,
- OM4 50/125μm, bend insensitive fiber
- Insertion loss ≤0.35dB, return loss ≥20dB
- Plenum (OFNP)/LSZH
- Minimum bend radius 7.5mm
- Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | XXMPOOM4 |
|---|---|
| Manufacturer | HT |
| Connector A | MPO Female/Male |
| Connector B | MPO Female/Male |
| Polish Type | UPC to UPC |
| Glass Fiber | Bend Insensitive Fiber |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Trunk Outside Diameter (OD) | 3.0mm-12.0mm |
| Cable Jacket | Plenum (OFNP)/LSZH |
| Connector Durability | 500 times |
| Minimum Bend Radius | 7.5mm |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥20dB |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | OFNP: -10 to 60°C (14 to 140°F)LSZH: -10 to 70°C (14 to 158°F) |
| Storage Temperature | OFNP: -10 to 70°C (14 to 158°F)LSZH: -20 to 70°C (-4 to 158°F) |
Applications
This jumper is intended for high density data center patching. It works equally well in new structured cabling builds and in day-to-day moves, adds and changes where fast, error-free reconnection matters.
Polarity and Gender Options
This model is supplied in the polarity shown in the specification table. Type A maps fiber 1 to fiber 1 straight through, Type B reverses the array, and Type C swaps adjacent pairs. Female (pinless) connectors mate with panels and cassettes; male (pinned) versions are available for direct transceiver connection. Tell us your cabling scheme and we will build the matching variant.
Ordering Information
Ordering is simple: send us XXMPOOM4 and your required lengths and quantities, and we return a factory quote the same working day. Small trial orders are welcome before you commit to a full project rollout.
Quality and Testing
We do not ship untested product. Each unit is measured on calibrated equipment for optical performance and visually inspected for end face quality before packing. Batch traceability is maintained so any field issue can be tracked back to production.
How We Pack
Each assembly is coiled, capped and sealed in an individual bag, then packed into foam lined export cartons. Test reports can be attached per unit or per batch, and carton marks follow your shipping instructions.
Built to Your Spec
Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.
