MTP-8 APC to 4 x MDC UPC Harness, 8MTP-8 APC to 4 x MDC UPC Harness, 8 Fibers, OS2, Type B
This MTP® Elite Female harness fans one multi-fiber connector out to duplex LC legs, replacing a cassette and patch cords with a single factory tested assembly. OS2 9/125μm fiber, 8 Fibers, Plenum (OFNP) jacket.
Standard lengths are 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft) and 40m (131ft). Because we are the manufacturer, any other length between or beyond these steps can be produced on request, with your choice of jacket color, labeling and packaging.
Product Highlights
- MTP® Elite Female (Non-Pinned) to MDC UPC, 8 Fibers
- OS2 9/125μm, G.657.A1
- Insertion loss ≤0.35dB (0.15dB Typ.), return loss ≥60dB
- Type B polarity
- 3.0mm Plenum (OFNP) round cable
- Minimum bend radius 10mm
- Ten standard lengths from 1m (3ft) to 40m (131ft), custom lengths built to order
Specifications
| Part Number | 8FMTPMDCSMF |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP® Elite Female (Non-Pinned) |
| Connector B | US Conec MDC UPC |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310nm |
| Polish Type | APC to UPC |
| Polarity | Type B |
| Cable Jacket | Plenum (OFNP) |
| Fiber Count | 8 Fibers |
| Glass Fiber | G.657.A1 |
| Minimum Bend Radius | 10mm |
| Breakout Outside Diameter (OD) | 2.0mm |
| Cable Outside Diameter (OD) | 3.0mm |
| Installation Tensile Load | 66N |
| Tensile Strength | 80/240N (Long/Short Term) |
| MTP Connector IL | ≤0.35dB (0.15dB Typ.) |
| MTP Connector RL | ≥60dB |
| MDC Connector IL | ≤0.3dB |
| MDC Connector RL | ≥50dB |
| Operating Temperature | -10 to 60°C (14 to 140℉) |
| Storage Temperature | -10 to 70°C (14 to 158℉) |
Applications
Install this harness between an MPO trunk or panel and LC based transceivers. The 8-fiber version matches 400G and 800G parallel interfaces that run on 4 or 8 lanes, such as QSFP112, OSFP and twin-port OSFP connections. The labeled duplex legs make it easy to land each pair on the correct port.
LC Legs and Port Mapping
Every LC duplex leg is factory polished and tested individually, with return loss well above the multimode or single mode requirement. The fan-out is compact and strain relieved, and the leg numbering matches the polarity table for error-free patching.
Ordering Information
Ordering is simple: send us 8FMTPMDCSMF and your required lengths and quantities, and we return a factory quote the same working day. The 1m (3ft) version is the standard model; Small trial orders are welcome before you commit to a full project rollout.
Quality and Testing
Our test routine covers insertion loss, return loss and ferrule end face inspection on every assembly. Because testing is done in-house, custom variants receive exactly the same verification as standard models.
How We Pack
Each assembly is coiled, capped and sealed in an individual bag, then packed into foam lined export cartons. Test reports can be attached per unit or per batch, and carton marks follow your shipping instructions.
Built to Your Spec
Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.
