MTP-8 to 4 x LC UPC Harness, 8 FibersMTP-8 to 4 x LC UPC Harness, 8 Fibers, OM4, Type B
Our MTP® Elite Female harness cable gives you a direct MTP to LC duplex connection without any intermediate hardware. 8 Fibers on OM4 50/125μm fiber with Plenum (OFNP) jacket, with each LC leg labeled for fast port mapping.
Standard lengths are 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft) and 40m (131ft). Because we are the manufacturer, any other length between or beyond these steps can be produced on request, with your choice of jacket color, labeling and packaging.
Product Highlights
- MTP® Elite Female (Non-Pinned) to LC Duplex, 8 Fibers
- OM4 50/125μm, bend insensitive fiber
- Insertion loss ≤0.35dB (0.15dB Typ.), return loss ≥27dB
- Type B polarity
- 3.0mm Plenum (OFNP) round cable
- Minimum bend radius 7.5mm
- Ten standard lengths from 1m (3ft) to 40m (131ft), custom lengths built to order
Specifications
| Part Number | 8FMTPLCOM4 |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP® Elite Female (Non-Pinned) |
| Connector B | LC Duplex |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Polish Type | UPC to UPC |
| Polarity | Type B |
| Cable Jacket | Plenum (OFNP) |
| Fiber Count | 8 Fibers |
| Glass Fiber | Bend Insensitive Fiber |
| Minimum Bend Radius | 7.5mm |
| Breakout Outside Diameter (OD) | 2.0mm |
| Cable Outside Diameter (OD) | 3.0mm |
| Breakout Length | 0.5m |
| Tensile Strength | 80/240N (Long/Short Term) |
| MTP Connector IL | ≤0.35dB (0.15dB Typ.) |
| MTP Connector RL | ≥27dB |
| LC Connector IL | ≤0.2dB |
| LC Connector RL | ≥30dB |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) |
| Storage Temperature | -10 to 70°C (14 to 158℉) |
Applications
This harness is ideal when your backbone is multi-fiber but the equipment side is duplex LC. The 8-fiber version matches 400G and 800G parallel interfaces that run on 4 or 8 lanes, such as QSFP112, OSFP and twin-port OSFP connections. It eliminates the cassette, reduces connection points and lowers total link loss.
LC Legs and Port Mapping
The duplex LC legs are manufactured to a uniform breakout length and labeled in sequence, so each pair lands on the intended port. Uniboot and standard duplex LC options are available, and leg length can be adjusted for your rack layout.
Ordering Information
Ordering is simple: send us 8FMTPLCOM4 and your required lengths and quantities, and we return a factory quote the same working day. The 1m (3ft) version is the standard model; Small trial orders are welcome before you commit to a full project rollout.
Quality and Testing
Every MPO/MTP assembly leaving our factory is 100% tested for insertion loss and return loss, with end face geometry checks on the multi-fiber ferrules. Controlled polishing keeps the loss budget stable across the whole batch, which matters when several mated pairs sit in one link.
Built to Your Spec
Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.
How We Pack
Each assembly is coiled, capped and sealed in an individual bag, then packed into foam lined export cartons. Test reports can be attached per unit or per batch, and carton marks follow your shipping instructions.
