MMC-24 APC to 3 x MTP-8 APC BreakoutMMC-24 APC to 3 x MTP-8 APC Breakout Cable, 24 Fibers, OM4
Singapore high-density designs should assess this item together with panel access, cable routing and the complete optical loss allowance. The APC-to-APC variant of the 24FMMCMTPOM4 breakout carries 24 OM4 fibers from one MMC APC female connector to three MTP-8 APC Elite female legs. All link points use APC polish, and the cable fan-out follows factory harness polarity. It features three eight-fiber multimode channels in one compact, production-terminated product.
Product Highlights
- MMC Female to MTP® Female, 24 Fibers
- OM4 50/125μm, bend-insensitive fiber
- MMC insertion loss ≤0.35dB, return loss ≥40/45dB (MMC/MTP®)
- Harness Polarity wiring scheme
- 2.5mm Plenum (OFNP) cable
- Standard length options: 1m (3ft), 2m (7ft), 3m (10ft)
Specifications
| Part Number | 24FMMCMTPOM4 |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MMC Female (Non-Pinned) |
| Connector B | US Conec MTP® Elite Female (Non-Pinned) |
| Polish Type | APC to APC |
| Glass Fiber | Bend Insensitive Fiber |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Fiber Count | 24 Fibers |
| Polarity | Harness Polarity |
| Cable Outside Diameter (OD) | 2.5mm |
| Cable Jacket | Plenum (OFNP) |
| Min. Bend Radius (Optical Fiber) | 7.5mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Tensile Strength (Long Term) | 30N |
| Tensile Strength (Short Term) | 100N |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥40/45dB (MMC/MTP®) |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) |
| Storage Temperature | -10 to 70°C (14 to 158℉) |
A three-way fan-out with uniform polish
This assembled cable is proper when both the MMC infrastructure and all three MTP destinations are optimized for APC. These optical interfaces are female and non-pinned; consequently, pinned mates are correct throughout. make sure of that the application truly calls for three eight-fiber branches and that no extra polarity reversal is introduced by the connected trunk or cassette before rollout.
Loss values for the complete optical path
This optical assembly is rated at 0.35dB maximum insertion loss, with at least 40dB return loss at MMC and 45dB at MTP APC. Use these connector-specific figures when reviewing the passive channel. OM4 performance at 850/1300nm supports multimode systems, but allowable distance and overall link count remain properties of the full transceiver path.
Installing and identifying three APC branches
Standard cable lengths are 1m (3ft), 2m (7ft) and 3m (10ft), with lengths built to order in feet or meters. Because three analogous MTP connectors leave one fan-out, branch markings are above all valuable. Preserve gentle routing around the breakout body, check every ferrule and cap any branch that must not be treated as connected immediately.
Ordering and Factory Support
Document 24FMMCMTPOM4 in the APC-to-APC three-leg arrangement, with length and quantity. If the three branches terminate in differing rack locations, feature the correct leg arrangement and marking rather than relying on a generic fan-out plan. Singapore and regional project orders can be reviewed for interface compatibility, packing details and delivery coordination.
