MMC-16 to MTP-16 APC Jumper, 16 FibersMMC-16 to MTP-16 APC Jumper, 16 Fibers, OM4
Singapore high-density designs should assess this item together with panel access, cable routing and the complete optical loss allowance. This MMC-16 to MTP-16 jumper connects two differing multi-fiber form factors over sixteen OM4 fibers. The MMC connector interface and MTP Elite end are both APC female, and the bend-insensitive multimode cable uses a 2.5mm plenum jacket. It offers a direct, compact patching version between MMC infrastructure and installed MTP-16 multimode hardware.
Product Highlights
- MMC Female to MTP® Female, 16 Fibers
- OM4 50/125μm, bend-insensitive fiber
- MMC insertion loss ≤0.35dB, return loss ≥40/45dB (MMC/MTP®)
- Jumper Polarity wiring scheme
- 2.5mm Plenum (OFNP) cable
- Standard length options: 1m (3ft), 2m (7ft), 3m (10ft)
Specifications
| Part Number | 16FMMCMTPOM4 |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MMC Female (Non-Pinned) |
| Connector B | US Conec MTP® Elite Female (Non-Pinned) |
| Polish Type | APC to APC |
| Glass Fiber | Bend Insensitive Fiber |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Fiber Count | 16 Fibers |
| Polarity | Jumper Polarity |
| Cable Outside Diameter (OD) | 2.5mm |
| Cable Jacket | Plenum (OFNP) |
| Min. Bend Radius (Optical Fiber) | 7.5mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Tensile Strength (Long Term) | 30N |
| Tensile Strength (Short Term) | 100N |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥40/45dB (MMC/MTP®) |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) |
| Storage Temperature | -10 to 70°C (14 to 158℉) |
Practical role in a multimode channel
This optical assembly suits migrations where MMC panels are being introduced without replacing every MTP-based link. A single factory-built jumper avoids an extra adapter pair that would otherwise be needed to convert form factors. It remains essential to examine that the active equipment or cassette presents the specified pinned mates and that the path requires APC at both connector interfaces.
Connector-specific return-loss requirements
The MMC interface is specified for at least 40dB return loss; concurrently, the MTP APC interface is specified for at least 45dB; maximum insertion loss across this optical assembly is 0.35dB. Keeping distinct connector figures in the documentation makes diagnostics more meaningful. OM4 attenuation is 2.3dB/km at 850nm and 0.6dB/km at 1300nm, with actual arrangement reach set by the optics.
Installation length and cable care
Decide on from 1m (3ft), 2m (7ft) and 3m (10ft) standard versions, or ask for a customized meter or foot length. Do not attempt to pull this optical assembly by either connector boot during routing. Support the 2.5mm cable through the manager, preserve the 7.5mm fiber bend allowance and keep dust caps fitted until both end faces have been inspected.
Ordering and Factory Support
Order by part number 16FMMCMTPOM4 with length and quantity. Customized markings may specify the MMC and MTP ends separately, which is helpful when multiple transition leads occupy the corresponding panel; ask for this marking when submitting the order. Singapore and regional project orders can be reviewed for interface compatibility, packing details and delivery coordination.
